EN10219 Rectangular Hollow Section

Share with

Description

Rectangular Hollow Section

rectangular hollow section

Standards&Grades:

EN 10219:S235JRH,S355J2H,S355NH,S355J0H

ASTM A500:Gr.A,Gr.B,Gr.C

CSA G40.20-04

AS/NZS1163

JIS G3466

Dimensions for EN10219 Rectangular Hollow Section

AxB WT
100×80 6-6.3mm
120×60 2.5-8mm
120×80 3-8mm
140×80 4-8mm
150×100 4-12.5mm
160×80 4-12.5mm
180×100 4-12.5mm
200×100 4-12.5mm
200×120 4-12.5mm
250×150 5-16mm
260×180 5-16mm
300×100 6-16mm
300×150 6-16mm
300×200 6-16mm
350×250 6-16mm
400×200 8-16mm
400×300 8-16mm


The tolerances on dimensions are established in accordance with EN 10219-1&2

Characteristics Tolerances
Outside dimensions of side (H,B100mm) 1% with a min of 0.5mm
H : Longest side
B : Shortest side
(100mmH,B200mm) 0.8%
(200mmH,B) 0.6%
Wall thickness(T) (T5mm) 10%
(5mmT) 0.50mm
Concavity / Convexity MAX 0.8% with a min of 0.5mm
Squareness of sides 901
External corner radius (T6mm) 1.6TR2.4T
(6mmT10mm) 2.0TR3.0T
(10mmT) 2.4TR3.6T
Twist 2mm + 0.5mm/m in length
Straightness 0.15% in total length
Mass 6% in individual lengths
Length Approximate 0, +50mm
Exact L6,000mm 0, +5mm
6,000mmL10,000mm 0, +15mm
10,000mmL 0, +5mm+1mm/m
NOTE
1)The outside dimensions are measured across the flats at positions at least 50mm from the end of the HSS.

 

Name
Email
Phone
Enquiry